Share:

Share on facebook
Facebook
Share on twitter
Twitter
Share on pinterest
Pinterest
Share on linkedin
LinkedIn

Hardwood Flooring Buffing – A Great Way To Do It

Share This Post

Share on facebook
Share on linkedin
Share on twitter
Share on email

Hardwood Flooring is indeed one of the best flooring you will find in many homes today. Hardwood Flooring comes in a variety of styles, finishes and colors. But it’s still very important for you to take the extra time to choose the right one for your home. In this article I will show you some easy and basic things you can do to keep your hardwood floors looking their best.

You should always start by sanding your wood floors. This will help remove any dust or dirt that may be sitting on them. Once they are completely clean you can then apply the polish. Now I know you may be asking, “How much?” I’ll tell you, a good buffing session should take no more than a few minutes. There’s no need to rush, if you over do it you will cause your hardwood flooring buffing to become uneven and take away from the color.

If you are concerned about unevenness or dullness then you need to start by using only fine sandpaper. It’s best to start with 200 grit sandpaper to refinish hardwood flooring buffing. Start by placing some drops of oil onto your fingers and lightly sanding your floor. You can also make the initial sanding of your floor into a paste by using some baking soda.

If you don’t have oil, then you will want to start by using some skim milk. Use a soft and smooth scrub brush to apply it to your floor. The purpose of this is to soften up the dust particles that have been brought through the cracks during the sanding process. The skim milk will also help with any lumps or bumps that remain in the wood.

The best way to get started is to start with a low speed. You don’t want to try and do too much at one time. You can always speed up as you go along. Some of the basic rules of hardwood flooring buffing are sand paper on top and sandpaper below.

Buffing is not just about applying the sandpaper. You also need to get rid of any excess dust. If you are new to refinishing hardwood floors then you may want to invest in some quality polishing compound. These will make the job go a lot smoother. Once you’ve finished sanding, you will want to give your floors about 48 hours to dry before you place them in your house.

When it comes to hardwood floor care, prevention is still better than cure. Some of the things that are necessary for the best job done are such things as sweep and dust out daily, use a good quality polishing compound and get rid of all the dirt. Some polishes also have an anti streak property that makes your job go a lot easier. For those that are just refinishing their floors then they will probably use only the buffing approach with the use of a power washer. It is important to make sure that you never run the water on your floor until the polish has dried thoroughly.

Hardwood Flooring buffing should be done every six to eight weeks depending on the amount of time that your floors take to dry. Some homeowners like to do it sooner but there are pros and cons to both. In the end it is all up to you and how much time you want to spend doing the job. Make sure that you buff your hardwood floors every couple of weeks for best results and you will have floors that look brand new.

Subscribe To Our Newsletter

Get updates and learn from the best

More To Explore