Share:

Share on facebook
Facebook
Share on twitter
Twitter
Share on pinterest
Pinterest
Share on linkedin
LinkedIn

Hardwood Flooring Buffing Can Revive Your Wooden Floors

Share This Post

Share on facebook
Share on linkedin
Share on twitter
Share on email

In most cases, a hardwood floor refinishing kit comes with several different buffing kits, which include instructions for both sanding and polishing. For best results, you should always apply the new refinishing compound at a slower rate than you would with sweeping or sanding alone. If the finish has been worn down to the bare wood grain, then apply more compound than necessary and allow it to cure completely before moving on to the next refinishing job. By doing this, you’ll ensure that there will be no missed spots when the finish is applied.

Hardwood Flooring buffing|Hardwood Flooring buffing

Hardwood Flooring Buffing Can Revive Your Wooden Floors

In most cases, a hardwood floor refinishing kit comes with several different buffing kits, which include instructions for both sanding and polishing. For best results, you should always apply the new refinishing compound at a slower rate than you would with sweeping or sanding alone. If the finish has been worn down to the bare wood grain, then apply more compound than necessary and allow it to cure completely before moving on to the next refinishing job. By doing this, you’ll ensure that there will be no missed spots when the finish is applied.

}

Begin by removing all furniture and carpeting from the rooms that need refinishing. Clean out the living and family rooms thoroughly, taking particular care to remove any food, drinks or litter that may have accumulated in the living and family rooms. With your vacuum cleaner, clear away all loose debris and clean air ducts and filters. Once the rooms are completely clean, move on to the hardwood floors.

Start the hardwood flooring buffing process by pre-drilling all necessary holes for the steam vacuum head and the rotary brush. Use your rotary brush to sweep the floor and make sure it is clear of any debris. For the first thing in the process, clean the entire floor using a non-abrasive dust mop and the damp rags that you will receive with the kit. This first step is not only important for keeping you from accidentally over polishing the floor, but it also helps remove any dirt that may have gotten ground deep into the wood. Next, take out the first strip of wood that you want to use for the refinishing project. Place it along the bottom of your roller buffer or the center of your workbench.

For your hardwood floors, place three pieces of sandpaper between each other. Do not forget to wear a dust mask as you do this process. Using the lowest settings on your sandpaper, gently sand the entire floor. As soon as the floor is completely smooth and clear of imperfections, use the same sandpaper to finish the second side of the floor.

For those who prefer a little more work than the above mentioned method provides, there are a few other ways to get your wood floors the best look possible. If the scratches on your wood floors are making your neighbors dizzy and causing your guests to trip over them while you are trying to enjoy an afternoon nap, there are a few different options available. One option is to apply a clear sealer directly to the scratches. You can purchase this product at most local home improvement stores or you can consult a professional.

If this option does not solve your problem, another way to get your hardwood flooring buffed is by using a machine. This process works well for those with issues involving uneven floors. To begin, turn off the power and remove any accessories from your machine before you begin.

Next, place the sandpaper on your tabletop and use it in a sweeping motion across the entire floor. Do not forget to wear your dust mask as you do this process, especially if you have hardwood floors. After you have finished sweeping the sandpaper in a circular pattern, cover your bare feet with a paper towel so you won’t accidentally step on the sandpaper. Place the paper towel in a cup of warm water and place the sandpaper back in its shipping container for a few minutes.

In order to finish the Hardwood Flooring buffing process, place a clean cloth in a bowl of hot soapy water. Let the cloth to soak for about five minutes to soften the dirt. Rinse the cloth out and repeat the cleaning process until the hardwood floors are gleaming. Once the polish has dried, apply an appropriate number of finishing nails. Allow your nails to dry before placing them in your next room.

Subscribe To Our Newsletter

Get updates and learn from the best

More To Explore

Hardwood Flooring Buffing and Polishing

Hardwood Flooring Buffing You can do it yourself if you really want to, but many people would rather leave it to the professionals. It can