Share:

Share on facebook
Facebook
Share on twitter
Twitter
Share on pinterest
Pinterest
Share on linkedin
LinkedIn

Hardwood Flooring Buffing – Do-It-Yourself Project

Share This Post

Share on facebook
Share on linkedin
Share on twitter
Share on email

Hardwood Flooring buffing is something that you have to do on your own. There are no machines or even sandpaper in the house. And if there are, they are very expensive. So, how can you buff your wooden floors without spending a fortune? The best way is to use wood floor sandpaper.

Hardwood Flooring buffing|Hardwood Flooring buffing

Hardwood Flooring Buffing – Do-It-Yourself Project

Hardwood Flooring buffing is something that you have to do on your own. There are no machines or even sandpaper in the house. And if there are, they are very expensive. So, how can you buff your wooden floors without spending a fortune? The best way is to use wood floor sandpaper.

}

It does not matter what kind of hardwood floors you have installed in your home. You still need to do hardwood flooring buffing. However, to make things easier, you should have some idea about doing it yourself and the tools you will need to get started.

Start your hardwood flooring buffing by cleaning the floors thoroughly. Use a vacuum cleaner to clean dust and dirt. Then sweep and mop the floor thoroughly using a broom. Vacuum the dust back out of the house. If you have an upholstered furniture, you might want to open it and take off the cushions before you start working with the floor.

When you are cleaning the room, get rid of any dust particles by using a vacuum cleaner. After that, get down to the business of doing hardwood flooring buffing. Begin by removing the topmost layer of the wooden floors. You should know that when the first layer of flooring is removed, the uppermost layer of the wood is now ready for polishing.

To start your hardwood floor sanding job, you will need some very fine sandpaper. A good quality wood sandpaper is going to help you remove any scratches that may be left on the wooden floors. Start by making sure that all the edges of the room are smooth. Once you have done that, you can then move along and do some more sanding on the room.

You can choose to use either a drum sander or a belt sander when doing your hardwood flooring buffing job. It really depends on what you prefer the most. Either of these two tools is going to give you the best results when it comes to sanding the floors.

The next step in the process of buffing your wooden floors is to use some mineral spirits. This liquid will help to give you some protection from any of the small pieces of rough stone or other foreign substances that can enter into the room. Before you can start using this liquid, however, you are going to have to make sure that you have all of the proper equipment set up. For instance, you are going to need a dust mask and a face mask in order to breathe properly. You also want to have some eye protection for your eyes as well so that you don’t accidentally hit the surface with something that will leave a permanent mark. This can really mess up your hardwood floors if you don’t use the right equipment.

When you are buffing your hardwood floors, you should always start at the bottom. You should start sanding the floor until all of the dust is removed. As you work your way up, you will probably need to use a bit more sandpaper than you did in the middle to get all of the little nooks and crannies. Most people do not realize how much wood actually comes in contact with the sandpaper during the sanding process. This is why it is important to have a good quality set of sandpaper available.

After you have sanded all of the way down, the next step of refinishing hardwood floors is to get all of the excess sand out of the seams. You should be able to easily lift the entire piece of wood with just one hand without any trouble. However, if you do not have a lot of experience with refinishing wood pieces, you might find it helpful to have a friend to help you lift the item. It is definitely easier to finish sanding one single area at a time when you have someone holding you accountable.

After the entire item has been sanded, you are ready to begin applying the first coat of the wax coating. You should apply the wax in smooth movements so that it doesn’t wear away too quickly. Hardwood Flooring Buffing knows that each piece of hardwood floors is different so the coating may need to be applied in different steps. Just remember that the process does not have to cover the entire floor surface; just make sure that you cover every inch.

In the case that you are working on a new installation, you should start on the first board at the corner before proceeding to the rest of the project. Continue sanding in small steps until you achieve the opacity and smoothness of the final product. When you are done sanding, you should be able to see the wood grain from several inches away. If you are not satisfied, you can always go back and sand the boards one more time. Hardwood Flooring Buffing is a very simple process that allows you to refinish your wooden floors without having to call in a professional.

Subscribe To Our Newsletter

Get updates and learn from the best

More To Explore

Hardwood Flooring Buffing Basics

Hardwood Flooring is one of the most beautiful floor coverings available today. It adds great value to your home as well as character. But there