Share:

Share on facebook
Facebook
Share on twitter
Twitter
Share on pinterest
Pinterest
Share on linkedin
LinkedIn

Share This Post

Share on facebook
Share on linkedin
Share on twitter
Share on email

What exactly is it? Hardwood floor polishing is basically a process that is used to give your hardwood floor great looking finish. Basically, what you are doing is putting a fine sandpaper over your floors, using a machine to remove any scratches or dirt, then using a vacuum-style device to remove any residual dirt. This is done over again until the floors have the look you want.

Hardwood Flooring buffing|Hardwood Flooring buffing

Hardwood Flooring

What exactly is it? Hardwood floor polishing is basically a process that is used to give your hardwood floor great looking finish. Basically, what you are doing is putting a fine sandpaper over your floors, using a machine to remove any scratches or dirt, then using a vacuum-style device to remove any residual dirt. This is done over again until the floors have the look you want.

}

So how much do you need to spend on hardwood floor buffing? It all depends on what style your floor is in. For example, if you have more serious scratches and wear, you may need to hire a professional. On the other hand, if you just have a few deep scratches, you can do it yourself. However, if you have heavy traffic on your floors you may want to consider hiring someone to come in and give your floors a professional look. The amount you spend on hardwood floor buffing will depend on the detail of the job and the time you want to spend working on it.

What you buff and how you buff it will depend on the type of wood you have. For example, if you have oak floors, you need to go in with a good buffing pad on hand. You can find these pads at your local hardware store or place of purchase. In fact, you can buy a new pad for each different part of the floor that you are treating. This saves a lot of money as you won’t have to buy more than you need for each room.

As you begin the job, make sure you are using the right kind of hard sandpaper for the task at hand. When cleaning up deep scratches, use only fine sandpaper and be sure to apply a sealant between the wood and the sandpaper. If you are just trying out some specific areas, then you can use a little bit of extra sandpaper to sand off some of the rough edges. You don’t want to scrape up all the new life from the wood, so just sand away. You will see that the scratch makes the wooden flooring pop back to life.

After sanding and polishing, you can begin the actual refinishing process. To begin refinishing, you need to have clean floors that you can work on without worrying about being visible underneath the sanding and polishing. You will want to get a dustpan with a wooden floor attachment attached to it. Make sure that this is clean too because you don’t want to have dust all over your wooden floor. This may make refinishing difficult.

Start by applying one coat of an acid-free wood conditioner to your floors followed by a buffing machine. A buffing machine is used to make sure all of the scratches, dents, nicks, and gouges are removed so that the end result will look pristine. However, there are some cases when a refinishing machine is not needed, such as in cases where the damage is very minimal.

With your buffing machine turned on, you will start sanding. Do this in even passes, taking care to not go more than one inch at a time. The reason for the even sanding is to prevent the wooden floors from absorbing too much sand. Once the first few passes are done, use a finishing cloth to polish up the floor. However, you should finish sanding in even passes after the finish has been applied. You may find that these wooden floors need to have more coats of finishing sanding to get them as smooth as possible.

Hardwood Flooring can be very beautiful, especially when it has a natural polish and is refinished with a wooden floor refinishing method. It takes a little extra time than a regular sanding, but you will save money in the long run because the floors will stay looking better longer. If you choose this option, you will have to sand and finish the floor in smaller increments until the desired finish is achieved. If you are unsure about how to complete the refinishing process, you may want to hire a professional to do it for you. However, with proper care, these floors can last a lifetime.

Subscribe To Our Newsletter

Get updates and learn from the best

More To Explore

Hardwood Flooring Buffing

When you think about hardwood floor care, normally, most people automatically think of hiring some expert service. In fact, there are many ways that you