Share on facebook
Share on twitter
Share on pinterest
Share on linkedin

Tips On Hardwood Flooring Buffing

Share This Post

Share on facebook
Share on linkedin
Share on twitter
Share on email

Hardwood Flooring Buffing is essentially a method which is employed on solid wooden floors to bring the surface of the floor the highest possible appearance possible. If you’re considering a do it yourself project in the home you might be surprised to find out that there are actually many different types of polishes and waxes which can be used to get the floors looking their best. The kind of individual that would ideally be good for this job is somebody who either already has experience in such refinishing, or somebody who wishes to learn more about this method. We’ll take a look at the various types of do it yourself Hardwood Flooring Buffing that may interest you.

Hardwood Flooring Buffing can be undertaken by anybody who’s reasonably competent with basic home repair tools. It’s not uncommon for individuals with even very basic skills to be able to successfully complete this process without any outside help. If you have some knowledge about sanding and polishing this can be a particularly rewarding way of achieving a high quality finish that’s both durable and aesthetically pleasing. Hardwood Flooring Buffing can also be carried out by homeowners who are keen to restore some of their older flooring. You could use the opportunity to either treat old timber floors with a protective coating or you may decide to simply get some of it resanded to improve the appearance.

Some people decide to do their own hardwood flooring buffing as a form of “do-it-yourself” refinishing. If you have existing flooring that has become stained, discoloured or has lost its luster, then you could take steps to bring it back to its former glory. Sandpaper can be used to remove the majority of the present stains; however, it’s often the marks left on the surface that will be most problematic. A professional sandpaper and wood floors specialist could well be able to provide you with the finish you require.

Regardless of whether you decide to do the hardwood floors refinishing yourself or you employ someone to carry out the work, you must make sure that you understand the full extent of the job before you start. You must be aware of the various steps involved, including how much sandpaper and what grade sandpaper is required, as well as whether or not any type of protective coatings will need to be applied. All this information will be necessary for completing a successful refinishing job.

Polishing – this is one of the most important aspects of hardwood flooring buffing. Some homeowners wrongly believe that this is simply an aspect of sanding the floors down. The actual polishing process requires a very specific set of polishing procedures. These are referred to as the stroke operations. Some of these include honing, dipping, beading, using masking tape, feathering and setting.

In order to achieve the best result you must begin by preparing the surface to be worked on. The first thing to do in order to prepare the floor is to use the right type of sandpaper. When you decide to hire a company to do the hardwood flooring buffing it is extremely important that you find one that has the correct specification. The size of the room as well as the thickness will need to be taken into consideration. The following tips will help you to choose the right equipment for sanding your floors.

For the first step of hardwood flooring buffing you must make sure you have thoroughly wetted the sandpaper. This is necessary as the water helps to prevent the sandpaper from sticking to the floor. Next you will need to stand in a chair with the legs apart at shoulder width. The distance between the two legs should be a couple of inches and the height should be at least four inches. When you first start to buff the flooring, you will be using a machine that has an arm.

The next stage in the hardwood flooring buffing process is to place the sandpaper on the bare wood. Make sure there are no foreign particles or anything else on the wood. As long as you have a smooth bare wood, then you can start to roll the sandpaper over the area you have chosen. Buff the floor using the back of the machine against the grain. When it comes time to do the final finish coat of sandpaper, you will need to do it in small sections. You should only use small sections of sandpaper as you do not want to make any grooves in the wood.

Subscribe To Our Newsletter

Get updates and learn from the best

More To Explore